RDV Systems - I-295 Direct Connection 4

I-295 – Direct Connection – Bellmawr, NJ

CLIENTS: Dewberry Engineers; New Jersey DOT New Jersey DOT’s “Direct Connection” is a complete reconfiguration of the interchange of highways I-295, I-76, and SR-42 in the Town of Bellmawr, NJ. The redesigned interchange will provide direct connections between all three highways, which the current interchange lacks. The model is being used for coordination with town officials and other key stakeholders, …

RDV Systems - Danbury Route 37 1

Route 37 – Widening and Upgrades – Danbury, CT

CLIENTS: Luchs Consulting ; Town of Danbury, CT The Town of Danbury, CT engaged Luchs Consulting Engineers and RDV Systems to provide a visualization model of the proposed widening and upgrades to SR-37. The model is being used for public involvement and collaboration between municipal and state agencies. Back to Case Studies

RDV Systems - I-84 Hartford W2

I-84 – Corridor – Hartford, CT

CLIENTS: TranSystems Corp.; Connecticut DOT The I-84 Hartford corridor replacement study (www.i84hartford.com) has been described by ENR as the highest dollar value project currently in planning and design in the USA.  RDV was initially engaged to provide a model of the 3 mile corridor showing existing conditions only, with VISSIM traffic simulation superimposed on the 3D model.  This model was …

RDV Systems - I-295 Missing Moves 3

I-295 – Missing Moves – Bellmawr, NJ

CLIENTS: Dewberry; New Jersey DOT Dewberry Engineers was contracted by New Jersey DOT to design a new interchange between Interstate 295 and SR-42, providing a way for motorists traveling Northbound on one highway to cross over and travel Southbound on the other – a maneuver that is currently not possible. The new ramps will be located in the Town of …

RDV Systems - Derby Main Street 2

Main Street Improvements – Derby, CT

CLIENTS: Luchs Consulting Engineers; Town of Derby, CT This model shows the proposed improvements and streetscaping for SR-115, which is also Main Street in the Town of Derby, CT.  The model is being used for coordination between town officials and Connecticut DOT, and for outreach to the public and business owners. Back to Case Studies

RDV Systems - Pequonnock River Trail 1

Pequonnock River Trail – Trumbull, CT

CLIENT: Connecticut DOT This model shows the design of a proposed 1.5-mile pedestrian and bicycle trail in the Town of Trumbull, CT. Much of the trail is located within the right-of-way of an interchange on the Merritt Parkway and features pedestrian tunnels beneath interchange ramps and the re-use of an abandoned railroad bridge over the Merritt Parkway. CT DOT used …

RDV Systems - Monroe Roundabout 2

Roundabout – Monroe, CT

CLIENT: Connecticut DOT This model shows the design of a roundabout proposed to replace the intersection of state routes 110 and 111 in the town of Monroe, CT.  The model was initially created at the 60% design phase, and was used extensively for internal design review, public hearings, and meetings with town officials.  The model was recently updated to show …

RDV Systems - TF Green Airport 2

T.F. Green Airport – Providence, RI

CLIENTS: Stantec; Rhode Island Airport Corporation This model shows the design of proposed extensions to the runways at T.F. Green Airport to accommodate longer-range commercial flight service. One of the extensions involved clearing a large section of a residential neighborhood, re-routing of an arterial roadway, and re-location and replacement of an outdoor sports park. The model is being used by …

RDV Systems - NCDOT Grade Separation 4

SR 1620 Grade Separation – Kannapolis, NC

CLIENTS: North Carolina DOT This model shows the design of a proposed grade separation for a railroad crossing on SR-1620 in the town of Kannapolis, NC. The model represents an initial concept plan and was used for the initial NEPA public hearing in January 2015. Describing the hearing, the public information officer reported the following quote: Back to Case Studies

RDV Systems - Modiin Center 1

Downtown Master Plan – Modi’in, Israel

CLIENTS: City of Modi’in, Moshe Safdie Architects This model shows the proposed downtown master plan developed for the City of Modi’in, Israel by Boston–based Moshe Safdie Architects.  The plan features a “healthy campus” oriented central boulevard with wide pedestrian areas, fountains, kiosks, dedicated bicycle lanes, lined by commercial businesses.  The model is being used for public outreach and for marketing …